LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Panel System - Front End Body Panels >> Removal And Installation >> Fender >> Removal

Removal And Installation: Fender: Removal

  1. Remove the front bumper cover. For additional information, refer to BUMPERS .
  2. Remove the headlamp assembly. For additional information, refer to EXTERIOR LIGHTING .
  3. On the RH side, remove the windshield washer reservoir. For additional information, refer to WIPERS AND WASHERS .
  4. Remove the fender splash shield. For additional information, refer to FENDER SPLASH SHIELD .
  5. Remove the fender insulator.
  6. Remove the lower inner fender bolt.
  7. Remove the rocker panel fender bolt.
  8. Open the front door half way and remove the upper inner fender bolt.
  9. Remove the front fender bolt.
    Fig 1: Locating Front Fender Bolt
    G04654289Courtesy of FORD MOTOR CO.
  10. Remove the 3 upper fender bolts and the fender.