LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Panel System - Front End Body Panels >> Removal And Installation >> Fender Splash Shield >> Removal and Installation

Removal and Installation

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
  2. Remove the 6 pin-type retainers, 2 screws and the fender splash shield.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals