LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System - Pats >> Removal And Installation >> Passive Anti-Theft System (PATS) Transceiver >> Removal and Installation

Removal and Installation

  1. Disconnect the battery. For additional information, refer to BATTERY MOUNTING AND CABLES .
  2. Remove the audio control switch (if equipped).
    1. Using a suitable tool, release the locking tang.
    2. Disconnect the audio control switch electrical connector.
      Fig 1: Removing Audio Control Switch
      G04654277Courtesy of FORD MOTOR CO.
  3. Remove the 3 screws and the steering column lower shroud.
  4. Disconnect the PATS transceiver electrical connector.
  5. Remove the screw and the PATS transceiver.
  6. To install, reverse the removal procedure.