LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX5 SE, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> General Procedures >> Belt-Minder® Deactivating/Activating >> Deactivating/Activating

Belt-Minder® Deactivating/Activating: Deactivating/Activating

  1. Turn the ignition switch to the ON position (do not start the engine).
  2. Wait approximately 1 minute until the safety belt warning indicator turns off.
  3. NOTE: Step 3 must be completed within 50 seconds after the safety belt warning indicator turns off.
  4. To disable the seating position, buckle then unbuckle the safety belt 9 times, ending in the unbuckled state.
    • After Step 3, the air bag warning indicator illuminates for 3 seconds.
  5. Within 10 seconds of the indicator turning on, buckle then unbuckle the safety belt.
    • This disables the belt minder feature for that seating position, if it is currently enabled. As confirmation, the air bag warning indicator flashes 4 times per second for 3 seconds.
    • This enables the belt minder feature for that seating position, if it is currently disabled. As confirmation, the air bag warning indicator flashes 4 times per second for 3 seconds, followed by 3 seconds with the light off, then followed by the air bag warning indicator flashing 4 times per second for 3 seconds again.