LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Focus ZX4 SES, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Motors, Switches, Relays >> Battery, Mounting And Cables >> Removal And Installation >> Battery Tray >> Removal and Installation

Removal and Installation

  1. Remove the battery. For additional information, refer toBATTERY .
  2. Remove the 3 nuts and the battery tray.
    • To install, tighten to 12 Nm (9 lb-ft).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals