LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Expedition RWD >> Repair and Diagnosis >> Electrical >> Gauges >> Information And Message Center >> General Procedures >> Compass Zone Adjustment - With Message Center

Compass Zone Adjustment - With Message Center

    NOTE: The compass zone setting is preset from the factory to Zone 8.
    Fig 1: Compass Calibration Zone Map
    G03965509Courtesy of FORD MOTOR CO.
  1. Determine which magnetic zone you are in for your geographic location.
  2. Start the engine.
  3. Press the message center switch INFO button until the compass information is displayed.
  4. Press and hold the SETUP and RESET buttons until the message center display changes to show the current zone setting.
  5. Press the SETUP button repeatedly until the correct zone setting is displayed in the message center.
  6. To exit the zone steering mode, and lock in the changes, press and release the RESET button.
scientia non olet · About LEMON Manuals