LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Expedition RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information And Message Center >> General Procedures >> Compass Zone Adjustment - Without Message Center

Compass Zone Adjustment - Without Message Center

    NOTE: The compass zone setting is preset from the factory to Zone 8.
  1. Determine which magnetic zone you are in for your geographic location.
  2. Start the engine.
  3. Press the TRIP/RESET button, hold for 6 seconds and release. ZONE appears in the instrument cluster display.
  4. Press and release the TRIP/RESET button until the desired zone number appears.
  5. When the desired zone number appears in the instrument cluster display, hold the TRIP/RESET button down to set the new zone number. The instrument cluster display returns to the normal mode when the TRIP/RESET button is not pressed for 6 seconds.
scientia non olet · About LEMON Manuals