LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Power Transfer Unit (PTU)) >> In-Vehicle Repair >> Transfer Case Vent >> Removal

Transfer Case Vent: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: This procedure applies to vehicles equipped with manual transaxles.
  1. Remove the power transfer unit (PTU). For additional information, refer to POWER TRANSFER UNIT (PTU) - MANUAL TRANSAXLE  in the Removal portion of this article.
  2. Using a slide hammer with a 3-jaw puller attachment, remove the PTU tube.
scientia non olet · About LEMON Manuals