LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Power Transfer Unit (PTU)) >> In-Vehicle Repair >> Output Shaft Seal >> Installation

Output Shaft Seal: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Using the special tool, install the PTU rear output shaft oil (pinion) seal.
    Fig 1: Installing Rear Output Shaft Seal Using Special Tool
    G04621134Courtesy of FORD MOTOR CO.
  2. Install the deflector.
  3. Install the PTU rear output shaft flange. For additional information, refer to OUTPUT FLANGE .
scientia non olet · About LEMON Manuals