Stub Shaft Pilot Bearing And Seal: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the halfshaft assembly. for additional information, refer to rear drive halfshafts .
To remove the seal only, use the special tool to remove the stub shaft seal.

Fig 1: Identifying Special Tool (307-309,100-D01)
Courtesy of FORD MOTOR CO.
To remove the bearing and seal, use the special tools to remove the stub shaft pilot bearing and seal.

Fig 2: Identifying Special Tool (308-125, 100-D01)
Courtesy of FORD MOTOR CO.