Special Tool(S)
WARNING: This page is about a different variant/trim than selected.
SPECIAL TOOL CHART
| Slide Hammer 100-001 (T50T-100-A) |
|
| Pinion Seal Replacer 205-133 (T79P-4676-A) |
|
| Converter Seal Remover 307-009 (T94P-77001-BH) |
|
| 2 Jaw Puller 205-D072 (D97L-4221-A) or equivalent |
|
| Holding Fixture, Drive Pinion Flange 205-126 (T78P-4851-A) |
MATERIAL SPECIFICATION
| Item | Specification |
|---|---|
| Premium Long-Life Grease XG-1-C or XG-1-K (US); CXG-1-C (Canada) | ESA-M1C75-B |