DTC U0155: Lost Communication With Instrument Panel Cluster Control Module

WARNING: This page is about a different variant/trim than selected.

U0155 - LOST COMMUNICATION WITH INSTRUMENT PANEL CLUSTER CONTROL MODULE

Description:	Missing message concerns are logged by a module upon failure to receive a message from another module within a defined retry period.
Possible Causes:	Open VPWR circuit to the sending module Open GND circuit to the sending module Open network circuits to the sending module
Diagnostic Aids:	Carry out the diagnostics for the associated network module.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	Refer to the appropriate INSTRUMENT CLUSTER article .