DTC P2197: O2 Sensor Signal Biased/Stuck Lean - Bank 2, Sensor 1
WARNING: This page is about a different variant/trim than selected.
P2197 - O2 SENSOR SIGNAL BIASED/STUCK LEAN - BANK 2, SENSOR 1
| Description: | See the description for DTC P2195. | ||
| Possible Causes: | See the possible causes for DTC P2195. | ||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | GO to Pinpoint Test H . | GO to Pinpoint Test H . |