DTC P2008: Intake Manifold Runner Control (IMRC) Circuit Open (Bank 1)
WARNING: This page is about a different variant/trim than selected.
P2008 - INTAKE MANIFOLD RUNNER CONTROL (IMRC) CIRCUIT OPEN (BANK 1)
| Description: | This DTC indicates a failure in the IMRC primary control circuit. This DTC replaces P1520. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the IMRC and IMRCM PIDs. The IMRCM state should change when the IMRC is commanded open or closed. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test HU . | ||