DTC P1001: Key On Engine Running (KOER) Not Able To Complete, KOER Aborted
WARNING: This page is about a different variant/trim than selected.
P1001 - KEY ON ENGINE RUNNING (KOER) NOT ABLE TO COMPLETE, KOER ABORTED
| Description: | This non-malfunction indicator lamp (MIL) code is set when the KOER self-test does not complete in the time intended. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Carry out the KOEO self-test. Refer to STEP 1: POWERTRAIN CONTROL MODULE (PCM) QUICK TEST . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||