DTC P0320: Ignition/Distributor Engine Speed Input Circuit
WARNING: This page is about a different variant/trim than selected.
P0320 - IGNITION/DISTRIBUTOR ENGINE SPEED INPUT CIRCUIT
| Description: | The ignition engine speed sensor input signal to PCM is continuously monitored. The test fails when the signal indicates that 2 successive erratic profile ignition pickup (PIP) pulses occurred. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | The DTC indicates that 2 successive erratic PIP pulses occurred. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | - | - | GO to Pinpoint Test NC . |