DTC P0223: Throttle/Pedal Position Sensor/Switch B Circuit High
WARNING: This page is about a different variant/trim than selected.
P0223 - THROTTLE/PEDAL POSITION SENSOR/SWITCH B CIRCUIT HIGH
| Description: | The electronic throttle control (ETC) throttle position (TP) sensor 2 circuit was flagged as a concern by the powertrain control module (PCM) indicating a high voltage. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This concern exhibits a symptom of limited power. A TP2 PID (TP V PID) reading greater than 93% (4.65 volts) in key ON, engine OFF or key ON, engine running indicates a concern is present. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DV . | ||