DTC P0192: Fuel Rail Pressure Sensor A Circuit Low
WARNING: This page is about a different variant/trim than selected.
P0192 - FUEL RAIL PRESSURE SENSOR A CIRCUIT LOW
| Description: | The comprehensive component monitor (CCM) monitors the fuel rail pressure (FRP) sensor circuit to the powertrain control module (PCM) for low voltage. If voltage falls below a calibrated limit for a calibrated amount of time during testing, the test fails. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | A FRP PID value during key ON, engine OFF or key ON, engine running less than 0.3 volt indicates a concern is present. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test DD . | ||