LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (Engine Controls - Pinpoint Test DX: Engine Coolant Temperature (ECT) Sensor Through Engine Controls - Pinpoint Test He: Exhaust Gas RECIRCULATION (EGR) Systems - (Except Diesel & Hybrid)) >> Pinpoint Test Hd: Misfire Detection Monitor >> Introduction >> Notes

Pinpoint Test Hd: Misfire Detection Monitor: Introduction: Notes

WARNING: This page is about a different variant/trim than selected.
WARNING: CROWN VICTORIA POLICE INTERCEPTOR VEHICLES EQUIPPED WITH FIRE SUPPRESSION SYSTEM, REFER TO FIRE SUPPRESSION SYSTEM FOR IMPORTANT SAFETY WARNINGS. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

This pinpoint test is intended to diagnose the misfire detection monitor.

Clearing the PCM DTCs erases any PCM recorded freeze frame data. Make sure to record any PCM freeze frame information before proceeding any further. Refer to FREEZE FRAME DATA .