LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 33 (Automatic Transmission Cooling System - Cd4E) >> Removal And Installation >> Cooler Bypass Valve >> Removal

Cooler Bypass Valve: Removal

WARNING: This page is about a different variant/trim than selected.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the driver side splash shield.
  3. Remove and discard the transmission fluid cooler tube from the pump area of the case.
    • Remove the transmission fluid cooler tube from the transaxle.
  4. Remove the transmission fluid cooler tube bracket bolt.
  5. Disconnect the transmission fluid cooler hose from the auxiliary cooler.
    6. NOTE: Do not remove the steel tube from the converter housing.
  6. Remove the transmission fluid cooler hose from the converter housing and the lower fitting of the radiator. Discard the hose.
  7. Remove the 2 bolts from the lower LH side of the main control cover.
scientia non olet · About LEMON Manuals