LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls - Description & Operation (Except Diesel & Hybrid)) >> Dual-Injection Fuel Delivery System >> Fuel Injector Interface Module

Fuel Injector Interface Module

WARNING: This page is about a different variant/trim than selected.

The fuel injector interface module is used to control the dual-injection fuel delivery system for gasoline engines. Based on an input from the PCM the fuel injector interface module controls either single or dual-injection modes. For additional information, refer to POWERTRAIN CONTROL HARDWARE .

scientia non olet · About LEMON Manuals