Final Drive Carrier and Differential Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.

Install the differential side gears and thrust washers.

Fig 1: Identifying Differential Side Gears & Thrust Washers
Courtesy of FORD MOTOR CO.
Install the differential pinion gears and thrust washers.
- Rotate the differential pinion gears 90 degrees.
  
  Fig 2: Locating Differential Pinion Gears & Thrust Washers
  Courtesy of FORD MOTOR CO.
Install the differential pinion shaft.
1. Push the pinion shaft in place.
2. Install the roll pin.
  
  Fig 3: Identifying Differential Pinion Shaft & Roll Pin
  Courtesy of FORD MOTOR CO.