Removal And Installation
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument panel switch plate.
- Remove the parking aid switch.
- Disconnect the electrical connectors from the parking aid switch, rear defrost switch (if equipped), and transfer case control switch (if equipped).
- Release the locking tabs that retain the parking aid switch to the switch plate.
- Remove the parking aid switch from the switch plate.
- To install, reverse the removal procedure.