LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 669 (Engine Cooling System - F250-F550) >> Removal And Installation >> Cooling Fan Stator - 6.0L Diesel >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cooling fan. For additional information, refer to Cooling Fan - 6.0L Diesel  in this article.
  2. Remove the 4 bolts and cooling fan stator.
    • To install, tighten to 40 N.m (30 lb-ft).
    3. Fig 1: Locating Cooling Fan Stator Bolts
    GF0005896Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals