LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 598 (Body Panel System - Front End Body Panels - F150 & Mark LT) >> Removal And Installation >> Fender Splash Shield >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. If equipped, remove the wheelhouse lip moulding.
  2. Remove the front bumper cover brace.
  3. Remove the fender splash shield screws.
  4. Remove the fender splash shield.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals