LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Escape Hybrid, FWD >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Engine Ignition - 2.3L >> Removal And Installation >> Spark Plugs >> Removal

Spark Plugs: Removal

  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Disconnect the ignition coil electrical connectors.
  3. Remove the bolts and the ignition coils.
  4. Remove the spark plugs.
    CAUTION: Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug.
    NOTE: Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.
scientia non olet · About LEMON Manuals