LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2006 >> Escape Hybrid, FWD >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Battery, Mounting And Cables >> Removal And Installation >> Battery Tray >> Removal and Installation

Removal and Installation

  1. Remove the battery. For additional information, refer to BATTERY .
  2. Release the battery cable retainers from the battery tray.
  3. Remove the 4 battery tray bolts.
    • To install, tighten to 9 Nm (80 lb-in).
  4. Remove the battery tray.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals