Instrument Cluster Diagnostic Trouble Code (DTC) Index
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) INDEX
| DTC | Description | Source | Action |
|---|---|---|---|
| B1202 | Fuel Sender Circuit Open | Instrument Cluster | GO to PINPOINT TEST B . |
| B1204 | Fuel Sender Circuit Short to Ground | Instrument Cluster | GO to PINPOINT TEST B . |
| B1205 | EIC Switch Number 1 Assembly Circuit Failure | Instrument Cluster | CHECK the select/reset button for binding and sticking. If OK, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B1317 | Battery Voltage High | Instrument Cluster | REFER to CHARGING SYSTEM - GENERAL INFORMATION . |
| B1318 | Battery Voltage Low | Instrument Cluster | REFER to CHARGING SYSTEM - GENERAL INFORMATION . |
| B1342 | ECU is Defective | Instrument Cluster | CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is retrieved again. INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B2143 | NVM Memory Failure | Instrument Cluster | TURN the ignition switch to the ON position and OBSERVE the odometer display. Does the odometer display ERROR? If yes, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . If the odometer does not display ERROR, CLEAR the DTCs. REPEAT the self-test. |
| B2477 | Module Configuration Failure | Instrument Cluster | REFER to MODULE CONFIGURATION . |
| U1900 | CAN Communication Bus Fault | Instrument Cluster | REFER to MODULE COMMUNICATIONS NETWORK . |
| All Other DTCs | - | Instrument Cluster | REFER to MULTIFUNCTION ELECTRONIC MODULES . |