Intermediate One-Way Clutch: Disassembly

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: One tab that locks the reverse clutch drum into the reverse sun shell may be removed. This is done for balancing purposes.

Remove the intermediate one-way clutch.
1. Remove the snap ring.
2. Remove the intermediate one-way clutch.

Fig 1: Identifying Intermediate One-Way Clutch And Snap Ring

Courtesy of FORD MOTOR CO.