Intermediate One-Way Clutch: Assembly

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The intermediate one-way clutch must rotate counterclockwise when installed on the reverse clutch drum and will make a ratchet sound.

Install the intermediate one-way clutch.
1. Install the intermediate one-way clutch.
2. Install the snap ring.

Fig 1: Identifying Intermediate One-Way Clutch And Snap Ring

Courtesy of FORD MOTOR CO.