Instrument Cluster Diagnostic Trouble Code (DTC) Index
INSTRUMENT CLUSTER DIAGNOSTIC TROUBLE CODE (DTC) INDEX
| DTC | Description | Source | Action |
|---|---|---|---|
| B1202 | Fuel Sender Circuit Open | Instrument Cluster | GO to PINPOINT TEST B . |
| B1204 | Fuel Sender Circuit Short To Ground | Instrument Cluster | GO to PINPOINT TEST B . |
| B1205 | Instrument Cluster Switch Number 1 Assembly Circuit Failure | Instrument Cluster | Refer to INFORMATION AND MESSAGE CENTER to continue diagnosis of the message center. |
| B1317 | Battery Voltage High | Instrument Cluster | Refer to CHARGING SYSTEM - GENERAL INFORMATION to continue diagnosis of the charging system. |
| B1318 | Battery Voltage Low | Instrument Cluster | Refer to CHARGING SYSTEM - GENERAL INFORMATION to continue diagnosis of the charging system. |
| B1342 | ECU is Defective | Instrument Cluster | INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B1868 | Lamp Air Bag Warning Indicator Circuit Failure | Instrument Cluster | INSTALL as new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B1870 | Lamp Air Bag Warning Indicator Circuit Short to Battery | Instrument Cluster | INSTALL as new instrument cluster. REFER to INSTRUMENT CLUSTER . TEST the system for normal operation. |
| B2143 | NVM Memory Failure | Instrument Cluster | CLEAR the DTCs. REPEAT the self-test. If DTC is still present, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . |
| B2477 | Module Configuration Error | Instrument Cluster | Refer to MODULE CONFIGURATION to continue diagnosis of the configuration. |
| B2627 | Fuel Sender Circuit Open #2 | Instrument Cluster | GO to PINPOINT TEST B . |
| B2628 | Fuel Sender Circuit Short To Ground #2 | Instrument Cluster | GO to PINPOINT TEST B . |
| B2675 | Trip Reset Button Stuck | Instrument Cluster | VERIFY that the instrument cluster bezel is aligned correctly and the SELECT/RESET button is not binding. REPAIR as necessary. If the switch is not binding, INSTALL a new instrument cluster. REFER to INSTRUMENT CLUSTER . |
| B2879 | Fuel Tank Jetpump Fault | Instrument Cluster | GO to PINPOINT TEST B . |
For a complete list of instrument cluster DTCs, refer to MULTIFUNCTION ELECTRONIC MODULES .