LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Freestyle SE, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console >> Removal And Installation >> Instrument Cluster Finish Panel >> Removal and Installation

Removal and Installation

  1. Adjust the steering column to the full TILT-DOWN position.
  2. Remove the 2 instrument cluster finish panel screws.
  3. Release the locking tabs on the steering column upper shroud located behind the steering wheel.
    Fig 1: Locating Locking Tabs On Steering Column Upper Shroud Located Behind Steering Wheel
    G03989206Courtesy of FORD MOTOR CO.
  4. Remove the instrument cluster finish panel and the steering column upper shroud as an assembly.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals