LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Focus ZXW SE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 812 (Body Panel System - Front End Body Panels -- F250-F550 Super Duty) >> General Procedures >> Hood Alignment

Hood Alignment

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the hood.
  2. Loosen the hood hinge-to-hood bolts.
    3. Fig 1: Loosening The Hood Hinge-To-Hood Bolts
    GF0004760Courtesy of FORD MOTOR CO.
  3. Move the hood forward or rearward and from side to side as required for correct hood fit.
    4. Fig 2: Moving The Hood Forward Or Rearward
    GF0004761Courtesy of FORD MOTOR CO.
  4. Tighten the hood hinge-to-hood bolts.
    5. Fig 3: Identifying Hood Hinge-To-Hood Bolts
    GF0004762Courtesy of FORD MOTOR CO.
  5. Adjust the hood height using the hood adjustment bumpers until flush with the fenders.
scientia non olet · About LEMON Manuals