DTC P0010: Intake Camshaft Position Actuator Circuit/Open (Bank 1)
P0010 - INTAKE CAMSHAFT POSITION ACTUATOR CIRCUIT/OPEN (BANK 1)
| Description: | The comprehensive component monitor (CCM) monitors the variable cam timing (VCT) circuit to the powertrain control module (PCM) for high and low voltage. If during testing the voltage falls below a calibrated limit for a calibrated amount of time the test fails. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | This DTC is a circuit check. Testing should include the harness and solenoid coil. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to HK: Variable Cam Timing (VCT) STEP HK1. | ||