LEMON Manuals: Even more car manuals for everyone

Home >> Ford >> 2005 >> Focus ZX5 S, Automatic >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Diagnosis And Testing >> Pinpoint Tests - Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) >> Pinpoint Test BE: DTC B2909 - Belt Tension Sensor Fault >> Possible Causes

Possible Causes

A belt tension sensor circuit fault can be caused by one of the following:

Damaged wiring, terminals or connectors.
A faulted belt tension sensor.
A faulted OCS ECU.

scientia non olet · About LEMON Manuals