Fault Conditions
The restraints control module (RCM) monitors communications from the OCS system. It will store diagnostic trouble code (DTC) B2290 in memory if a fault is present in the OCS system.
NOTE:
PID Module Version Status will not display when flagging DTC B2290, it must monitored independently from B2290.
The OCS system reports the following fault conditions to the RCM:
- A mounting fault.
- An ECU (internal) fault.
- A communication fault.
- A calibration fault.
- A pressure sensing fault.
- A module version status-RCM version conflicts with OCS version.