DTC P1001: KOER Not Able To Complete, KOER Aborted
P1001 - KOER NOT ABLE TO COMPLETE, KOER ABORTED
| Description: | This non-malfunction indicator lamp (MIL) code is set when the key on/engine running (KOER) self-test does not complete in the time intended. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Run the self-test following QT1 in SYMPTOM CHARTS, STEP 1: PCM QUICK TEST . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||