Crankshaft Front Seal: Installation
- Using the special tool, install the crankshaft front oil seal.
- Install the crankshaft pulley. For additional information, refer to CRANKSHAFT PULLEY .
NOTE:
Remove the through-bolt from the special tool.
NOTE:
Lubricate the oil seal with clean engine oil.
CAUTION:
The crankshaft, the crankshaft sprocket and the pulley are fitted together by friction, using diamond washers between the flange faces on each part. For that reason, the crankshaft sprocket is also unfastened if you loosen the pulley. Therefore, the engine must be re-timed each time the damper is removed. Otherwise severe engine damage can occur.