Wiper System And Washer System
- Specifications
- Description And Operation
- Diagnosis And Testing
- Wipers and Washers
- Notes
- Special Tool(s)
- Inspection and Verification
- Generic Electronic Module (GEM) Diagnostic Trouble Code (DTC) Index
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: The Wipers Are Inoperative
- Pinpoint Test B: The Wipers Stay On Continuously
- Pinpoint Test C: The High/Low Wiper Speeds Do Not Operate Correctly (Intermittent Wiper Mode OK)
- Pinpoint Test D: The Wash And Wipe Function Is Inoperative
- Pinpoint Test E: The Rear Window Wiper Stays On Continuously
- Pinpoint Test F: The Rear Window Wiper Is Inoperative
- Pinpoint Test G: The Wipers Will Not Park At The Correct Position
- Pinpoint Test H: The Intermittent Wiper Speed Does Not Operate Correctly (High/Low Speeds OK)
- Pinpoint Test I: The Washer Pump Is Inoperative
- Component Tests
- Rear Wiper Motor
- Front/rear wiper relay
- Wiper/Washer Switch
- Wipers and Washers
- Removal And Installation