- The individual fog lamp is inoperative
|
|
- MEASURE the resistance between the LH fog lamp C152 pin 2, circuit 31-LD11 (BK), harness side and ground; or between the RH fog lamp C162 pin 2, circuit 31-LD17 (BK), harness side and ground.
- If the resistance is less than 5 ohms, REPAIR circuit 15S-LD11 (GN/WH) (LH fog lamp) or 15S-LD17 (GN/WH) (RH fog lamp). TEST the system for normal operation.
- If the resistance is not less than 5 ohms, REPAIR the fog lamp ground circuit. TEST the system for normal operation.
|