- The individual reversing lamp is inoperative
|
|
- MEASURE the resistance between the LH reversing lamp C451, circuit 31-LG9 (BK), harness side and ground; or between the RH reversing lamp C461, circuit 31-LG16 (BK), harness side and ground.
- If the resistance is less than 5 ohms, REPAIR circuit 15S-LG9A (GN/BK) (LH reversing lamp) or circuit 15S-LG16 (GN/OG) (RH reversing lamp). TEST the system for normal operation.
- If the resistance is not less than 5 ohms, REPAIR the reversing lamp ground circuit. TEST the system for normal operation.
|