Pinpoint Test KD: Electric Exhaust Gas Recirculation (EEGR) System: Introduction: Notes

This pinpoint test is intended to diagnose the following:

• EEGR System.
• EEGR stepper motor (9D475).
• Harness circuit: EEGR.
• Powertrain control module (PCM) (12A650).
  Fig 1: Electric Exhaust Gas Recirculation (EEGR) Assembly Connector

  Courtesy of FORD MOTOR CO.
  Fig 2: Manifold Absolute Pressure (MAP) Sensor Connector

  Courtesy of FORD MOTOR CO.