LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Focus ZX4 SES, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Symptom Charts (Except Diesel & Hybrid) >> Step 3: No DTCS Present Symptom Charts >> Chart 2

Chart 2

SYSTEM/COMPONENT REFERENCE ( PINPOINT TEST - GASOLINE MODELS unless noted)
Battery Condition and Current Draw Visual. REFER to CHARGING SYSTEM - GENERAL INFORMATION .
Secondary Ignition System For vehicles equipped with a coil pack ignition system, GO to PINPOINT TEST JC .
For all others, GO to PINPOINT TEST JB .
Fuel Delivery System GO to PINPOINT TEST HC .
Exhaust System GO to F: Catalyst Efficiency Monitor and Exhaust Systems STEP HF8.
PCV System GO to PINPOINT TEST HG .
EVAP System GO to X: Evaporative Emission (EVAP) Monitor and System STEP HX14.
Applications without electronic throttle control: 
Intake Air System
GO to PINPOINT TEST HU .
Starting System REFER to STARTING SYSTEM .
Mass Air Flow (MAF) Sensor GO to C: Mass Air Flow (MAF) Sensor STEP DC26.
Additional Testing GO to PINPOINT TEST Z .
Additional Checks:
  • For applications with two camshaft position (CMP) sensors, verify the CMP1 and CMP2 circuits are not shorted together.
Visual