Engine Controls - Pinpoint Test JE: Integrated Ignition Coil Pack A, B, Or C Failure Through Pinpoint Test KP: Charge Air Cooler (CAC) Pump - (Except Diesel & Hybrid)
- Pinpoint Test JE: Integrated Ignition Coil Pack A, B, or C Failure
- Pinpoint Test JF: Integrated Ignition Coil On Plug Coil A Through J Failure
- Pinpoint Test JH: Tachometer Signal Output (CTO)
- Pinpoint Test KA: Fuel Pump (FP) Relay
- Pinpoint Test KB: Fuel Pump Driver Module
- Introduction
- Notes
- Fuel Pump Driver Module (FPDM) Connector
- Fuel Pump Driver Module 2 (FPDM2) Connector
- Fuel Pump Driver Module Power (FPDM PWR) Relay Connector
- Fuel Pump Driver Module 2 Power (FPDM2 PWR) Relay Connector
- Fuel Pump/Rear Electronics Module Power (FP/REM PWR) Relay Connector
- Inertia Fuel Shutoff (IFS) Connector
- FPDM PWR Relay Integral to the PDJB
- Power Distribution Junction Box (PDJB) Connector
- Powertrain Control Module (PCM) Connector
- Test Procedure
- Introduction
- Pinpoint Test KD: Electric Exhaust Gas Recirculation (EEGR) System
- Pinpoint Test KE: Idle Air Control (IAC) Valve
- Pinpoint Test KF: Fan Control (FC) Relays
- Pinpoint Test KJ: Supercharger Bypass Control
- Pinpoint Test KM: Air Conditioning Clutch Relay (A/CCR) Circuit
- Pinpoint Test KN: Variable Speed Electric Cooling Fan
- Pinpoint Test KP: Charge Air Cooler (CAC) Pump