Removal and Installation

Disconnect the battery. For additional information, REFER to BATTERY, MOUNTING AND CABLES .
Remove the air cleaner housing. For additional information, REFER to INTAKE AIR DISTRIBUTION & FILTERING .
Remove the brake master cylinder nuts.

Fig 1: Removing Brake Master Cylinder Nuts With Torque Specifications
Courtesy of FORD MOTOR CO.
Position the brake master cylinder aside.

Fig 2: Positioning Brake Master Cylinder Aside
Courtesy of FORD MOTOR CO.
Disconnect the booster vacuum hose.

Fig 3: Disconnecting Booster Vacuum Hose
Courtesy of FORD MOTOR CO.
Disconnect the power distribution box auxiliary relay and set aside.

Fig 4: Disconnecting Power Distribution Box Auxiliary Relay
Courtesy of FORD MOTOR CO.
Remove the instrument panel steering column opening cover.

Fig 5: Removing Instrument Panel Steering Column Opening Cover
Courtesy of FORD MOTOR CO.
Remove the brake pedal position (BPP) switch self-locking pin.

Fig 6: Locating Redundant Self-Locking Clip Cover And Self-Locking Clip
Courtesy of FORD MOTOR CO.
Remove the BPP switch and the brake booster push rod from the brake pedal pin.

Fig 7: Locating BPP Switch
Courtesy of FORD MOTOR CO.
Remove the power brake booster nuts.

Fig 8: Removing Power Brake Booster Nuts With Torque Specifications
Courtesy of FORD MOTOR CO.
Remove the power brake booster.

Fig 9: Removing Power Brake Booster
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.