Pinpoint Test KF: Fan Control (FC) Relays: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
Proceed to DTC testing steps listed in FAULT CODE SETTING CONDITION table of fault code setting condition.
FAULT CODE SETTING CONDITION
| Fault Code | Setting Condition | Testing |
|---|---|---|
| P0480 | KOEO, KOER | KF1 |
| P0480 | Continuous Memory | KF43 |
| P0481 | KOEO, KOER | KF11 |
| P0481 | Continuous Memory | KF45 |
| P0482 | KOEO, KOER | KF6 |
| P0482 | Continuous Memory | KF47 |