Pinpoint Test KD: Electric Exhaust Gas Recirculation (EEGR) System: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
Proceed to DTC testing steps listed in FAULT CODE SETTING CONDITION table of fault code setting condition.
FAULT CODE SETTING CONDITION
| Fault Code | Application | Setting Condition | Testing |
|---|---|---|---|
| P1408 | Vehicles With an Electric EGR (EEGR) | KOER | KD8 |
| P1408 | Vehicles with an EGR system module (ESM) | KOER | PINPOINT TEST HH STEP 16 |
| P1408 | All others | KOER | PINPOINT TEST HE STEP 36 |