LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine - 3.0L (4V)) >> In-Vehicle Repair >> Crankshaft Front Seal >> Installation

Crankshaft Front Seal: Installation

WARNING: This page is about a different variant/trim than selected.
    NOTE: Clean all sealing surfaces with metal surface cleaner.
  1. Apply clean engine oil to the seal lip and seal bore before installing the seal.
  2. Using the special tools, install a new crankshaft front seal.
    Fig 1: Installing Crankshaft Front Seal
    G03898281Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals