LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine - 3.0L (4V)) >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Disassembly

Cylinder Head: Disassembly

WARNING: This page is about a different variant/trim than selected.
CAUTION: If the components are to be reinstalled, they must be installed in the same positions. Mark the components removed for locations.
  1. Remove the hydraulic lash adjusters.
  2. Using the special tool, remove the keys, retainer and spring.
    Fig 1: Removing Keys, Retainer And Spring
    G03898516Courtesy of FORD MOTOR CO.
  3. Remove the valve from the cylinder head.
  4. Remove the valve stem seal.
scientia non olet · About LEMON Manuals