LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Escape Hybrid, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine - 3.0L (4V)) >> Disassembly And Assembly Of Subassemblies >> Cylinder Head >> Assembly

Cylinder Head: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Using the special tool, install the valve stem seal.
    Fig 1: Installing Valve Stem Seal
    G03898517Courtesy of FORD MOTOR CO.
  2. Install the valve.
  3. Using the special tool, install the valve spring, retainer and key.
    Fig 2: Installing Valve Spring, Retainer And Key
    G03898516Courtesy of FORD MOTOR CO.
  4. Install the hydraulic lash adjusters.
    • Lubricate the hydraulic lash adjusters with clean engine oil.
scientia non olet · About LEMON Manuals